Introduction
Use a dated exterior record to connect siding, windows and interior changes after severe weather.
A photograph of one damaged panel is useful when it is tied to an elevation, nearby opening and date. Start with views from a safe ground-level position so the assessor can locate what you observed.
Prepare a storm timeline
Record when hail or high wind occurred and when damage was noticed. Note any later rain that may have changed conditions.
Photograph what is visible
Capture each safely accessible elevation from the ground. Record the position of visible dents, cracks, displaced panels or damaged trim.
Identify openings and joints
Note nearby windows, doors and service penetrations on photos or a sketch. These locations help the assessor connect exterior and interior findings.
- Prepare a storm timeline
- Photograph what is visible
- Identify openings and joints
Review older repairs
Share records for siding replacement, trim repairs or past water entry. Point out which areas had visible changes before the recent storm.
Check adjoining interiors
Document changes near exterior openings and on the wall behind reported damage. Include when the marks first appeared or spread.
Ask about short-term protection
Have the inspector explain any temporary measures and how they affect access. Decide who will update the property contact after more weather.
- Review older repairs
- Check adjoining interiors
- Ask about short-term protection
Review the proposed scope
Ask which materials and elevations are included and whether concealed areas need further assessment. Discuss matching the remaining siding and trim.
Coordinate associated trades
Identify who will review windows, roof edges or interior moisture when those items are involved. Agree on how each team will share its findings.
Plan site access
Share driveway, tenant and delivery restrictions. Confirm where crews can stage material and where foot traffic needs to remain open.
- Review the proposed scope
- Coordinate associated trades
- Plan site access
Save the closeout record
Keep the repair description and final photos organized by elevation. Attach any follow-up items and the person responsible for each one.
Check whether the proposed siding repairs affect window trim, drainage edges or finished interior walls. Ask the contractor who will coordinate those boundaries if more than one trade is involved.
Conclusion
Use the storm record to connect visible siding changes with openings, trim and adjacent interiors. Document who will repair each area and keep the final photos with the agreed scope.

